If you’re looking for some very cheap DIY Garden Bed and Planter Ideas then you’re in luck. There are thousands of inexpensive but highly functional plans available online today. You can make a nice bed using simple materials from just about anywhere you live. You’ll find that there are also many great DIY plans to keep in mind that you won’t find anywhere else.
The concept behind the bed is not very complicated at all. As with any type of bed, the bed in question will be made up of frame planks or beams. You will usually choose the length of the bed. Just remember that no matter what, you will need a little planning and determination before you start building this type of bed.
- Cute Way to Use an Old Rustic Bed Frame in the Garden
- Colorful Garden Bed Made from Painted Cinder Blocks
- Plant Your Veggies in These Galvanized Troughs
- Outdoor Planter Made from Recycled Tires
- Transformed Stone into Rustic and Different Planters
- Cinder Block Plants Bed for Small Gardening
- River Rock Between This Wooden Raised Beds
- Giant Letter Planter for Your Front Porch
- Make Round Raised Garden Bed with Bricks
- A Wire Spool Planter in Your Garden
- Recycle an Old Wagon Wheel for a Divided Succulents Bed
- Planter Made from Old Towel and Quick Dry Cement
- Connect Plastic Milk Crates Together to Set Up a Garden Bed
- Flower Shaped Garden Bed with Recycled Plastic Bottles
- Get a U Shaped Garden Bed Kit with a Small Gate and Surrounding Fence
- Build Tiered Beds from Wooden Pallets
- Mickey Head Flower Planter Created from Concrete Blocks
- Garden Beds Edged with Old China Plates
- Turn Umbrella Upside Down to Transform It to a Flower Bed
- Side Yard Makeover Started from Building a Garden Bed
A lot of people don’t realize that the length of your standard bed is actually quite large. In fact, if you don’t plan carefully, you may end up spending more money than you need to. If you go longer than you expected, the planks will wear out sooner than you had hoped. Because of this, I recommend that you start by going about making a bed that’s one or two or three boards shorter than the measurements you need. This way, you won’t have to pay for parts that will wear out sooner than you wanted.
Now let’s say that you’ve done this and you have a bed that is only one or two boards short of what you need. This means that you can now start building. Remember that you want to create a bed that’s relatively easy to assemble. If it’s not easy to assemble, it will not be that great of a bed.
One important step to take when you’re planning your bed is to think about how you’re going to position the planks. There are three different types of bed to consider. The first one is the sliding bed. It looks a little like a lounge chair with just two legs instead of four. The second one is the bunk bed.
The third type of bed is the traditional bed. These beds have four, six, or eight legs and are positioned in the usual position on a bed frame. There is really not a “right” type of bed to use because you can get these types of beds in all shapes and sizes.
Once you’ve decided on what type of bed you want, you will need to decide whether you’re going to use one plan piece for all of the bed or whether you’re going to use different pieces. Most people end up using all of the same type of plan piece. If you do this, you’ll want to plan ahead so that you can start construction on the bed before it’s too late.
To avoid wasting time and money, you need to make sure that you have a good plan to start with. There are many sources to get these plans for free and they can save you a lot of money and time as well.